WILL NOT WORK FOR GLOCK™ MOS SLIDES. There are specific screws (not sold by us) sold for only MOS slides.
What 3 screws do you get? (x2) #6-32 x 3/8" and (x1) #6-32 x 7/16" Flat Head Socket Cap Black Oxide Alloy Steel Screws. The shorter #6-32 x 3/8" is used on the side of the slide to prevent binding of the Extractor Depressor Plunger.
For when you don't have any screws or have rounded your current screws after a few battery changes.
Works with MOST aftermarket GLOCK™ style and/or custom slides. We do not guarantee fitment. Please check with your specific application before purchasing.
Why a set of 3? We've found with our own collections and test fitments that this combination will give you the best options to fit the most applications for GLOCK™ style RMR cut slides.
Uses 5/64" Allen Hex Key
Torque: 10-12 inch/pounds. Please do not over tighten. We highly recommend a small amount of LOCTITE® THREADLOCKER BLUE 242® on each screw to prevent the screws from backing out.
- Sizes: #6-32 x 3/8" (x2) and #6-32 x 7/16" (x1)
- Torque: 10-12 inch/pounds
- Head Style: Flat
- Counter Sink Angle: 82 Degree
- Head Diameter: 0.307"
- Head Height: 0.097"
- Drive Style: Allen Hex Key
- Drive Size: 5/64"
- Thread Diameter: 0.138"
- Thread Class: Class 3A
- Screw Thread: Coarse
- Thread Coverage: Full Thread
- Thread Length Decimal: 0.278"
- Material: Alloy Steel
- Grade: Grade 8
- Finish: Black Oxide
- Specification 1: ASME : B18.3
- Tensile Strength: 120,000 PSI
- Core Hardness: Rockwell C32